The Best Food Processor – Reviews by

So, unless you are an old-school chef refusing to move on, a food processor is an obvious choice and a must-have. Life is too short to chop and grate unless you love it and have all the time in the world.

But with all the production outsourcing, it’s hard to make a solid, informed decision about what to spend your money on. That’s where I come in. I used to be a Quality Assurance Manager for one of the bigger names in the US home appliances industry.

This website (food processor reviews by will help you understand what’s a good investment and what’s a waste of money when buying a food processor.

Let me get into more depth here and explain some of the basic criteria I use when I rate and make my food processor reviews  I will try not to get technical and keep things simple.

But before we move any further, let’s clear the field. The words food processors are broad and can mean a range of things, starting from a manual chopper to a full-on multiuse food processor that can replace half of the stuff you might have in your kitchen right now.

If you want to see all of the top models compared side-by-side you can see my updated comparison chart here, but if you are in a hurry the following are the absolute best models in each category:

My review and choice in multiuse food processors:

Cuisinart DLC-2011CHB Prep 11 Plus 11-Cup Food Processor
Cuisinart DLC-2011CHB

My review and choice in the commercial food processors:

KitchenAid KFP1642CA Candy Apple Red Pro Line 16-cup Food Processor Review
KitchenAid KFP1642CA

My review and choice in blenders:

Ninja Blender Professional BL610

Ninja Blender Professional BL610

My review and top pick in juicers:

Omega J8006 Nutrition Center Juicer
Omega J8006

My review and top pick in electric choppers:

Ninja Master Prep Professional
Ninja Master Prep Professional

The multiuse food processor

These are those monsters with various functions that make you think that robots might indeed take over the world at some point. It is actually what most people picture when they say “food processor.”

They cover anything from chopping to making Bread Dough. I have one of these in my home (I’ll tell you which one later on), and I can’t imagine my life without it anymore. It’s common sense – why would you have 5 different things in your kitchen when you can have one of these babies. It helps more than my husband.

The sizes and functions of a multiuse

They come in a range of sizes, anywhere from 5-12 cups.

The smaller ones will be more of a chopper than anything else; they have a limit in terms of heavy-duty food processing.

Most of the time, they will include one disc.

The volume will be somewhere in the range of 5-8 cups, but don’t get fooled, even these smaller rascals pack some serious “heath”. They will do an excellent job for most of your shredding, grating and slicing needs. The prices will be influenced mostly by power, the variety of functions and the quality of the materials used.

The bigger ones, the one that I like :), will have several discs, a small work bowl and a hook for the dough. These will be priced higher, but if you do the math, it will be much cheaper than getting separate pieces.

How to know the multiple functions just by looking at an image of it?

Let’s learn something valuable here so that you don’t get a product and only then realize that it doesn’t include one of the features that’s important to you. Look at the design and the accessories that come with it.

Most of the time, one that only chops will not have a feeding tube where the foods for chopping and shredding need to go. If you see that a product has limited accessories, you might want to take a better look, because it’s often the case that you’ll have the option to add some functions by adding accessories.

First things first – a brief historical overview of a food processor

A food processor as we know it today entered the culinary scene back in the 60s, but back then it was only used commercially. They were first brought to the market by Robot Coupe (Ro-B-Koo) which is an active brand to date.

It was not before the 70s when they appeared in the homes, 1972 for UK consumers (brought by Robot Coupe) and 1973 for the US (by Cuisinart).

What do I look at when I write my food processor reviews?

  1. High-quality materials used on the blades: That makes the chassis heavier which will result in quicker and more consistent processing of your food. A heavier chassis will also keep the food from “walking”. You know, that pieces of food that stick to the side of the bowl and you have to stop and scrape them back in).
  2. Micro serrations on the blade are a big plus, and most of the high-end models have them. The serrated blades will hold their edge much longer. If the blades get dull, you will see your food being pulverized instead of chopped.
  3. Capacity – now, there’s no unique formula here, but if it were up to my choice, I would never go for anything that’s under 9 cups. One thing to keep in mind is that if you plan to process liquid that effectively cuts the capacity in half.
  4. Power – generally, the issue of a processor not having enough power for its capacity is almost non-existent these days. The companies know better. One thing to stay away from are the models with the side-mounted motors. In these models, the motors drive the blades via a belt. With this design the number of things that can go wrong inside at least doubles. That’s why they fail more frequently than the ones with the conventional design (base-mounted motor).
  5. One more thing – just because you see the higher wattage on the label doesn’t mean that the processor will be better at tackling heavy duty tasks. Let me explain – the power of the motor is one thing, and the efficiency is something else. That’s why you can compare the product of same wattage side by side and get completely different results. But how could you know how efficient the motor is? No way to know before you get it. I know companies, and I don’t even bother reviewing products that I know have a problem in this crucial area. So, you will not find any of that junk here. You can make this the first rule of thumb.
  6. If you don’t like any of the food processors, I review here and want to go with another one, make another rule of thumb – go with a reputable company. All of the big names stopped using low-efficiency motors on any of their models way back in the late 90s.
  7. A feed tube that is wide enough – forcing stuff in is frustrating
  8. Quality of the other materials, like the materials used for the handles and the bowls. It’s not very likely that you’ll see somebody talking about how good the plastic is, but I know products and brands that use cheap imported stuff. You won’t be seeing these products reviewed on this website.
  9. Design of the bowl – apart from the width of the tube, I tend to like a bowl with sloping sides than the ones that straight meet the base. The difference that this makes is that in models with sloping sides, the food is evenly distributed. This is instead of getting stuck in the corners of the orthogonal or square bowl.
  10. Safety – I check whether the best practices of the safety designed are in place. I look for 3 main things: the bowl locking securely to the base, the top locking to the bowl and the “ability” of the processor to recognize whether these two are in place and not start unless they are.
  11. I stay away from complicated controls. All you need is On, Pulse and Off. Most of the time, everything else is just an addition that makes the product much more expensive.
  12. Added attachments – I look for processors that have an S shaped attachment for mincing and pureeing, a dough blade (plastic) and a slicer disc.

These are the main features that make or break a product. All the other things that can be there or not can be a nice touch but are neither define the product nor can be a deal breaker.

The other features I’m talking about here are:

  • those smaller nifty cups
  • Touch controls – I know, know, it looks fancy, but let me debunk the myth that these are somehow better. It is how they are – they have the same buttons, with less “walk” (this means they react to less pressure). Then these buttons are covered with plastic to add that “wow” effect. The only real positive side to these is that they are easier to clean.
  • A slicer that can work continuously. Let me simplify – this is a special attachment that allows you to slice or shred as many vegetables as you want without stopping to empty the bowl. The food is directed into a separate bowl as we process it. I think I’ve used that thing once or twice.
  • Continuous feed slicer/shredder. It’s an extra attachment that allows you to slice or shred as many vegetables or as much cheese as you want without having to stop and empty the bowl. A chute directs the processed food into another bowl instead of depositing it in the integrated work bowl.

What if my blades wear out in time – there’s no “if” here, they will wear out. Any good processor will outlast the edges of its blades. When you see signs of low performance in your processor, get new blades. They carry them in kitchen shops, or you can order them from a manufacturer. To date, I am surprised at the number of people that think that the end of the blades is the end of the food processor.

Maintenance of your food processor

Just don’t overdo it. The chances are that this will not be the case unless you are a high-end chef in a busy restaurant. I wash mine under the shower using cold water because any heat affects the edges. If you’ve been processing something that sticks to the bottom and even a shower spout is not doing the trick, wash it in your dish washing machine using minimum temperature settings. If you don’t own one, leave if filled with water for a while and then use the shower.

What doesn’t it do?

One those things that you would expect it to do well and it doesn’t are mashed potatoes. It does that but in a way that gives them a certain gluey quality – no good. Also, I don’ like to use the food processor to make cakes that depend on some air getting into the batter, like sponge cake or anything with egg whites snow. It seems like the space inside is too confined to let enough air in – again, not very good.

So, let us take a step back and regroup. I’ve told you what to look for in a food processor, at least what I look at in my reviews.

Now, to simplify things, let me propose 3 simple questions you need to ask yourself before you get a food processor:

  • What do you need? A multi-function? Just a chopper? Just a bender?
  • Have you got the room in your kitchen for the one you have your eye on
  • How much are you prepared to spend?

I firmly believe that investing in a quality appliance is the best way to go. I know how the cheap ones work, and I know for a fact that, with the jungle that is the internet, cheap knock-offs are posing as the real thing. So, if something seems like it’s too good to be true, it probably is.

Again, you will see no such products on this website. I know the industry inside out, and I’ll never review or recommend any shady products.

I hope I helped somewhat with your decision…

I’ll let you process the information 🙂

2 thoughts on “The Best Food Processor – Reviews by”

  1. How come the bowl volume is not the actual real bowl volume. Just bought an “8” cup Cuisinart food processor. The total amount of liquid that can go in it is 4 cups. The bowl’s top measurement is 5 cups. And when I put 8 cups of water in it, it overflowed! I don’t get it.

  2. The cups have different sizes so maybe there is your answer. The important thing is you should read my food processor reviews and then decide, by comparing one with another, which food processor is the best for you.


Leave a Comment

Pin It on Pinterest